HP Color LaserJet Managed MFP E77822-E77830 On-Site Installation Guide - Page 77
Check the vertical gap between engine and finisher,
View all HP Color LaserJet Managed MFP E77822-E77830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Figure 7-13 Adjust hinge b. If the skew image is like the following example, adjust the hinge unit in the direction of the arrow. (1 scale = >1.0 mm skew adjustment) Figure 7-14 Adjust hinge 3. Detach the ADF sponge after adjusting the skew. Place the ADF sponge on the scanner glass. Close the ADF unit to attach the sponge. Check the vertical gap between engine and finisher Check the vertical gap between the finisher and engine. If the space is not equal at top and bottom, adjust the casters on the finisher to make the gap even. ENWW Check the vertical gap between engine and finisher 71
Figure 7-13
Adjust hinge
b.
If the skew image is like the following example, adjust the hinge unit in the direction of the arrow. (1
scale = >1.0 mm skew adjustment)
Figure 7-14
Adjust hinge
3.
Detach the ADF sponge after adjusting the skew. Place the ADF sponge on the scanner glass. Close the ADF
unit to attach the sponge.
Check the vertical gap between engine and finisher
Check the vertical gap between the finisher and engine. If the space is not equal at top and bottom, adjust the
casters on the finisher to make the gap even.
ENWW
Check the vertical gap between engine and finisher
71