HP Color LaserJet Managed MFP E77822-E77830 On-Site Installation Guide - Page 79
Staples, Engine firmware upgrade after installing finisher
View all HP Color LaserJet Managed MFP E77822-E77830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
2. Locate the embossed line on the lower right of the tray and apply the label. Staples NOTE: See the Staples task in the Complete installation procedures section for detailed instructions. Engine firmware upgrade after installing finisher CAUTION: After installing any accessory the firmware must be updated to make sure the printer firmware is compatible with the accessory. 1. Perform the firmware upgrade. 2. Verify the new finishing accessory is recognized and available. ENWW Staples 73
2.
Locate the embossed line on the lower right of the tray and apply the label.
Staples
NOTE:
See the
Staples
task in the
Complete installation procedures
section for detailed instructions.
Engine firmware upgrade after installing finisher
CAUTION:
After installing any accessory the firmware must be updated to make sure the printer firmware is
compatible with the accessory.
1.
Perform the firmware upgrade.
2.
Verify the new finishing accessory is recognized and available.
ENWW
Staples
73