HP Color LaserJet Managed MFP E77822-E77830 On-Site Installation Guide - Page 87
On-site final setup tray heater in the HP LaserJet MFP E82540, E82550, E82560 continued, Table 8-5
View all HP Color LaserJet Managed MFP E77822-E77830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table 8-5 On-site final setup tray heater in the HP LaserJet MFP E82540, E82550, E82560 (continued) ❑ Remove trays from the DCF. ❑ Note the cable connector on the tray heater. ❑ Note the tabs on the rear of the tray heater. ❑ Route the cable through the opening in the rear wall of the DCF. ❑ Insert the tabs on the rear of the tray heater into slots in the rear wall of the DCF. ❑ Insert one screw to secure the tray heater. ❑ Remove the rear cover of the DCF. ❑ Connect the cable from the tray heater to the cable of the DCF. ❑ Reinstall the rear cover of the DCF. ❑ Reinstall the trays in the DCF. ❑ Remove trays 2 and 3 from the device. ❑ Locate the tray heater power switch in the rear of the tray opening. ❑ Trun the switch ON to apply power to the tray heater(s). ❑ Reinstall trays 2 and 3 in to the device. ❑ Plug the MFP into the power outlet and power the device on. ENWW HP LaserJet MFP E72525, E72530, E72535 with a DCF and HP LaserJet Spacer installation checklist 81