HP DesignJet T7200 Using Your Printer - Page 196
Numeric error messages continued, Table B-2
View all HP DesignJet T7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Table B-2 Numeric error messages (continued) Error code Recommendation 38.10:08.2 The folding device has rejected a page because the finishing option is wrong. This page will not be reprinted and is removed from the printer queue. Select a finishing option that is supported by the folding device. 38.10:08.3 The folding device has rejected a page because the paper type is wrong. This page will not be reprinted and is removed from the printer queue. Select a paper type that is supported by the folding device. 38.10:18 The folding device has rejected a page for an unknown reason. This page will not be reprinted and is removed from the printer queue. See the documentation of the folding device for additional information. 61.01 The file format is incorrect and the printer cannot process the job. Try the following remedies: ● Turn off the printer by using the Power button on the front panel and the power switch at the back of the printer, and then disconnect the power cord-then reconnect the power cord and turn on the printer. ● Make sure that the graphic language setting is correct. See Change the graphic language setting on page 19. ● Resubmit the file to the printer. ● Check that your printer firmware is up to date. See Update the printer firmware on page 137. If the problem persists, contact HP Support. See Contact Support on page 171. 61.04 Install the latest firmware release. See Update the printer firmware on page 137. 61.08 The paper type has changed, please resubmit the job. 61.08.1 The job cannot be printed because it is password-protected. 61.08.2 The job cannot be printed because it contains errors. 63.04 An input/output problem has occurred with the network card. Try the following remedies: ● Make sure that the network cable is correctly connected to the network card. ● Check that your printer firmware is up to date. See Update the printer firmware on page 137. If the problem persists, contact HP Support. See Contact Support on page 171. 71.08 Out of memory. Data lost. In the HP-GL/2 and HP RTL driver, select the Advanced tab, Document options, Printer features, then enable the Send job as bitmap option before resubmitting the job. 188 Appendix B Front-panel error messages ENWW