HP DesignJet T7200 Using Your Printer - Page 51
Work with ink system components, Remove an ink cartridge
View all HP DesignJet T7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
● Allow the printer and the maintenance cartridge to clean the printheads automatically. ● Avoid unnecessary removal of the ink cartridges and printheads. ● The ink cartridges should never be removed while the printer is printing. They should be removed only when the printer is ready for you to replace them. The front panel guides you through the removal and installation procedures (or see Remove an ink cartridge on page 43 and Insert an ink cartridge on page 45. ● Make sure that you comply with all applicable laws and regulations when disposing of ink system consumables. NOTE: Shake the ink cartridges vigorously before installing them. See Insert an ink cartridge on page 45. Work with ink system components Remove an ink cartridge Ink cartridges should be removed for the following two reasons: ● The ink cartridge is very low and you want to replace it with a full cartridge for unattended printing. You can use the remaining ink in the first cartridge at a more convenient time. ● The ink cartridge is empty or faulty, and you must replace it to continue printing. CAUTION: The procedure to remove an ink cartridge must be initiated from the front panel. Do not remove an ink cartridge until the front panel prompts you. CAUTION: Remove an ink cartridge only if you are ready to insert another one. WARNING! Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving. 1. At the front panel, select the icon, then select Replace ink cartridges. ENWW Work with ink system components 43