HP DesignJet T7200 Using Your Printer - Page 33
Load a roll into the printer
View all HP DesignJet T7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Load a roll into the printer 1. At the printer's front panel, select the icon, and then select Paper load > Load roll. 2. Select the roll that you intend to load using the Up and Down keys. The printer puts all rolls on standby. 3. If the selected roll is currently loaded, the printer automatically unloads it, printing the barcode if Printing paper info is enabled (see Printing paper info on page 33). Remove the unloaded roll. 4. If Printing paper info is not enabled, the front panel asks you to select the paper type (see Supported paper types on page 23). 5. Open the roll door with its blue handle when prompted by the front panel. 6. Check that the hubs are the correct size for the roll you want to load. If necessary, change them. 7. Move the left hub to the left by pressing the blue lever. ENWW Load a roll into the printer 25