HP DesignJet T7200 Using Your Printer - Page 40
Cancel the drying time, Open the HP Color Center.
View all HP DesignJet T7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
The paper preset contains the ICC profile, which describes the color characteristics of the paper. It also contains information about other characteristics and requirements of the paper that are not directly related to color. Existing paper presets for your printer are installed in the printer's software. Your printer contains paper presets for only the most commonly used paper types. If you buy a paper type for which your printer has no preset, you cannot select that paper type in the front panel. You can assign a preset for a new paper type in three ways: ● Use an HP factory paper preset by selecting the closest category and type on the front panel or in the HP DesignJet Utility NOTE: Because colors might not be accurate, this method is not recommended for high-quality prints. ● Go to http://www.hp.com/go/designjet/downloads and click the HP DesignJet ICC/Paper presets and PANTONE tables link. Select from the HP DesignJet paper presets drop-down menu. NOTE: HP provides presets for HP paper types only. If you do not find the paper preset that you want on the Web, it might have been added to the latest firmware for your printer. Check the firmware release notes for information. See Update the printer firmware on page 137. Cancel the drying time Press the Form Feed and Cut button on the front panel. CAUTION: A print that has not dried sufficiently can suffer from quality problems. Change the drying time You can use the HP DesignJet Utility to change the drying time for a particular paper type, to accommodate special printing conditions. 1. Open the HP Color Center. 2. Select Paper preset management. 3. Select Change printing properties. 4. Select the paper category. 5. Select the paper type. 6. Choose a drying time from the Dry Time drop-down menu. NOTE: The text box to the right of the drop-down menu will not display the time in seconds when the Automatic option is selected (it is selected by default for all paper types). This is because the Automatic option means that the printer will calculate the optimal drying time for you depending on the temperature at printing time, and therefore it cannot be known in advance. You can turn off all drying time for all paper types by selecting the time > Off. icon, then Print retrieval > Select drying For more information about drying time, see Drying time on page 23. 32 Chapter 4 Handle the paper ENWW