HP Dl180 ProLiant DL180 Generation 5 Server Maintenance and Service Guide - Page 31
Drives, Cable Management
![]() |
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Figure 3 Removing the top middle cover To reinstall the top middle cover: 1. Align the top middle cover to the chassis. 2. Fasten the four screws (one on each side of the chassis and two on the top middle cover) to securing the top middle cover to the chassis. Figure 4 Reinstalling the Top Middle Cover Drives The server supports 9 to 12 drive bays --- 8 drive bays for 3.5-inch hard disk drives and 1 drive bay for optical disc drive; or 12 drive bays for 3.5-inch hard disk drives. Cable Management Always follow good cable management practices when working inside the server. Removal and replacement procedures 31
![](/manual_guide/products/hewlettpackard-dl180-proliant-dl180-generation-5-server-maintenance-service-guide-2830762/31.png)
Removal and replacement procedures
31
Figure 3
Removing the top middle cover
To reinstall the top middle cover:
1.
Align the top middle cover to the chassis.
2.
Fasten the four screws (one on each side of the chassis and two on the top middle cover) to
securing the top middle cover to the chassis.
Figure 4
Reinstalling the Top Middle Cover
Drives
The server supports 9 to 12 drive bays --- 8 drive bays for 3.5-inch hard disk drives and 1 drive bay
for optical disc drive; or 12 drive bays for 3.5-inch hard disk drives.
Cable Management
Always follow good cable management practices when working inside the server.