HP Dl180 ProLiant DL180 Generation 5 Server Maintenance and Service Guide - Page 41
Press the hard disk carrier button to release the ejector lever.
![]() |
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 17 Removing the hard drive blank IMPORTANT: Do not discard the hard drive blank. If the drive is removed in the future, you must reinstall the hard drive blank to maintain proper system airflow. 2. Install a hard drive: a. Push the hard drive assembly into the drive bay until it stops. b. Press the HDD carrier latch inward until it clicks. Figure 18 Installing the hard drive assembly To remove a hard drive: 1. Press the hard disk carrier button to release the ejector lever. 2. Use the HDD carrier latch to pull the drive out of the cage. Make sure to support the drive when pulling it out of the cage. 3. Pull the hard drive assembly out of the drive bay. Removal and replacement procedures 41
![](/manual_guide/products/hewlettpackard-dl180-proliant-dl180-generation-5-server-maintenance-service-guide-2830762/41.png)
Removal and replacement procedures
41
Figure 17
Removing the hard drive blank
IMPORTANT:
Do not discard the hard drive blank. If the drive is removed in the future, you must
reinstall the hard drive blank to maintain proper system airflow.
2.
Install a hard drive:
a.
Push the hard drive assembly into the drive bay until it stops.
b.
Press the HDD carrier latch inward until it clicks.
Figure 18
Installing the hard drive assembly
To remove a hard drive:
1.
Press the hard disk carrier button to release the ejector lever.
2.
Use the HDD carrier latch to pull the drive out of the cage.
Make sure to support the drive when pulling it out of the cage.
3.
Pull the hard drive assembly out of the drive bay.