HP Dl180 ProLiant DL180 Generation 5 Server Maintenance and Service Guide - Page 59
Installing PCIe/PCI-X Riser Board, Form Factor
![]() |
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Figure 46 Installing PCIe riser card (1) Figure 47 Installing PCIe riser card (2) Installing PCIe/PCI-X Riser Board The system supports up to two riser boards at a time. Use only HP supported expansion boards that meet the following specifications: • Compliance ○ PCI Express x4 or x8 ○ PCI-X (available only when the optional PCI-X riser board is installed) • Form Factor ○ Low-profile ○ Full-Height/Full-Length To remove the slot cover: 1. Remove the screw(s) that secure(s) the slot cover(s) to the chassis. Removal and replacement procedures 59
![](/manual_guide/products/hewlettpackard-dl180-proliant-dl180-generation-5-server-maintenance-service-guide-2830762/59.png)
Removal and replacement procedures
59
Figure 46
Installing PCIe riser card (1)
Figure 47
Installing PCIe riser card (2)
Installing PCIe/PCI-X Riser Board
The system supports up to two riser boards at a time. Use only HP supported expansion boards that
meet the following specifications:
•
Compliance
○
PCI Express x4 or x8
○
PCI-X (available only when the optional PCI-X riser board is installed)
•
Form Factor
○
Low-profile
○
Full-Height/Full-Length
To remove the slot cover:
1.
Remove the screw(s) that secure(s) the slot cover(s) to the chassis.