HP Dl180 ProLiant DL180 Generation 5 Server Maintenance and Service Guide - Page 36

Align the optical drive in the carrier and install drive.

Get HP Dl180 - G6 E5504 2X2gb 4Lff Svr PDF manuals and user guides
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

1. Press in the four tabs (two on the top and two on the bottom) to release the bezel blank from the carrier. 2. Pull the bezel blank out of the carrier. CAUTION: Do not discard the bezel blank. If the optical drive is removed in the future, you must reinstall the bezel blank to maintain proper system function. Figure 9 Removing the bezel blank To install the optical carrier with optical drive: 1. Align the optical drive in the carrier and install drive. 2. Secure the optical drive to the carrier with the two mounting screws. Figure 10 Assembling the optical drive and carrier 3. Slide the optical drive assembly into the chassis. 4. Secure the optical drive to the chassis with the screw. Removal and replacement procedures 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Removal and replacement procedures
36
1.
Press in the four tabs (two on the top and two on the bottom) to release the bezel blank from the
carrier.
2.
Pull the bezel blank out of the carrier.
CAUTION:
Do not discard the bezel blank. If the optical drive is removed in the future, you must
reinstall the bezel blank to maintain proper system function.
Figure 9
Removing the bezel blank
To install the optical carrier with optical drive:
1.
Align the optical drive in the carrier and install drive.
2.
Secure the optical drive to the carrier with the two mounting screws.
Figure 10
Assembling the optical drive and carrier
3.
Slide the optical drive assembly into the chassis.
4.
Secure the optical drive to the chassis with the screw.