HP Dl180 ProLiant DL180 Generation 5 Server Maintenance and Service Guide - Page 38
Hard drives, To remove the optical drive from its carrier
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Figure 13 Removing the optical drive To remove the optical drive from its carrier: 1. Remove the two screws that secure the optical drive to the carrier. 2. Remove the optical drive from its carrier. Figure 14 Removing the optical drive from its carrier IMPORTANT: If you removed an optical drive without plans of installing a new one, you must reinstall the blank to maintain proper system airflow. Hard drives The drive bays on the front panel can accommodate up to 8 hard drives. You can install 8 SAS hard drives or SATA hard drives in the server. For a server with 12 HDD, the hard drives installed in the server are labeled from Device 1 to Device 12, from left to right, top to bottom, when viewed from the front of the server. Removal and replacement procedures 38