HP ENVY 14-j100 Maintenance and Service Guide - Page 40

Hard drive, Release the zero insertion force ZIF connector

Get HP ENVY 14-j100 PDF manuals and user guides View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive cable, or screws. Description 2-TB, 5400-rpm, SATA, 9.5-mm, 2.5-in 1-TB, 5400-rpm, SATA, 7.0-mm, 2.5-in 750-GB, 5400-rpm, SATA, 7.0-mm, 2.5-in 500-GB, 5400-rpm, SATA, 7.0-mm, 2.5-in Spare part number 801808-005 833907-005 778190-005 778188-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). Remove the hard drive: 1. Disconnect the battery cable from the system board. 2. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 3. Remove the four Phillips PM2.0×3.3 screws (2) that secure the hard drive to the computer. 30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, hard drive cable, or screws.
Description
Spare part number
2-TB, 5400-rpm, SATA, 9.5-mm, 2.5-in
801808-005
1-TB, 5400-rpm, SATA, 7.0-mm, 2.5-in
833907-005
750-GB, 5400-rpm, SATA, 7.0-mm, 2.5-in
778190-005
500-GB, 5400-rpm, SATA, 7.0-mm, 2.5-in
778188-005
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
Remove the hard drive:
1.
Disconnect the battery cable from the system board.
2.
Release the zero insertion force (ZIF) connector
(1)
to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
3.
Remove the four Phillips PM2.0×3.3 screws
(2)
that secure the hard drive to the computer.
30
Chapter 5
Removal and replacement procedures for Customer Self-Repair parts