HP ENVY 14-j100 Maintenance and Service Guide - Page 76
CAUTION, Disconnect the display panel cable
View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
9. If it is necessary to replace the display panel: a. Remove the display bezel. b. Remove the four Phillips PM2.0×3.3 screws that secure the display panel to the display back cover. CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel. c. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in front of the display back cover. d. Release the adhesive strip (2) that secures the display panel cable connector to the display panel. e. Disconnect the display panel cable (3) from the display panel. The display bezel is available using the following spare part numbers: ● 833717-001 - 14.0-in, FHD, WLED, AntiGlare (1920×1080), slim (3.0-mm), UWVA eDP 1.2 ● 818124-001 - 14.0-in, FHD, WLED, AntiGlare (1920×1080), slim (3.0-mm), SVA eDP 1.2 ● 818123-001 - 14.0-in, HD, WLED, AntiGlare (1366×768), flat (3.6-mm), SVA eDP 1.2 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts