HP ENVY 14-j100 Maintenance and Service Guide - Page 50

to which the TouchPad board cable is attached, and then disconnect, Release the ZIF connector

Get HP ENVY 14-j100 PDF manuals and user guides View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

5. Remove the front speakers (see Front speakers on page 36). 6. Remove the battery (see Battery on page 38). Remove the TouchPad board: 1. Disconnect the battery cable from the system board. 2. Release the fingerprint reader board cable (1) from the TouchPad board. (The fingerprint reader board cable is secured to the TouchPad board with double-sided adhesive.) 3. Release the ZIF connector (2) to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable from the system board. 4. Remove the seven Phillips PM2.0×3.3 screws (3) that secure the TouchPad board to the top cover. 5. Remove the TouchPad board bracket (4). 40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
5.
Remove the front speakers (see
Front speakers
on page
36
).
6.
Remove the battery (see
Battery
on page
38
).
Remove the TouchPad board:
1.
Disconnect the battery cable from the system board.
2.
Release the fingerprint reader board cable
(1)
from the TouchPad board. (The fingerprint reader board
cable is secured to the TouchPad board with double-sided adhesive.)
3.
Release the ZIF connector
(2)
to which the TouchPad board cable is attached, and then disconnect
the TouchPad board cable from the system board.
4.
Remove the seven Phillips PM2.0×3.3 screws
(3)
that secure the TouchPad board to the top
cover.
5.
Remove the TouchPad board bracket
(4)
.
40
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts