HP ENVY 14-j100 Maintenance and Service Guide - Page 53
Fingerprint reader board
View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4. Detach and remove the RTC battery (3) from the system board. (The RTC battery is secured to the system board with double-sided adhesive.) Reverse this procedure to install the RTC battery. Fingerprint reader board Description Spare part number Fingerprint reader board NOTE: The fingerprint reader board spare part kit does not include the fingerprint reader board bracket or fingerprint reader board cable. The fingerprint reader board bracket is available using spare part number 818116-001. The fingerprint reader board cable is available using spare part number 818107-001. 818089-001 Before removing the fingerprint reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the front speakers (see Front speakers on page 36). 6. Remove the battery (see Battery on page 38). Remove the fingerprint reader board: 1. Disconnect the battery cable from the system board. Component replacement procedures 43