HP ENVY 14-j100 Maintenance and Service Guide - Page 70
Card reader board
View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
2. Remove the left speaker (2). Reverse this procedure to install the left speaker. Card reader board Description Card reader board NOTE: The card reader board spare part kit does not include the card reader board cable. The card reader board cable is available using spare part number 818106-001. Spare part number 818122-001 Before removing the card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28), and then remove the following components: a. Battery (see Battery on page 38) b. Fan (see Fan on page 47) c. RJ45 cover (see RJ45 cover on page 49) d. Security cable slot bracket (see Security cable slot bracket on page 51) e. System board (see System board on page 52) f. Left speaker (see Left speaker on page 59) Remove the card reader board: 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts