HP ENVY 14-j100 Maintenance and Service Guide - Page 64
When replacing the system board, be sure that the following components are removed
View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 32) ● Heat sink (see Heat sink on page 56) ● Memory module (see Memory module on page 34) Remove the system board: 1. Disconnect the following cables from the system board: ● (1) WLAN antenna cables from the terminals on the WLAN module NOTE: The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/black WLAN antenna cable connects to the WLAN module #2/Aux terminal. ● (2) Subwoofer cable ● (3) Power connector cable ● (4) Hard drive ZIF connector cable ● (5) TouchPad board ZIF connector cable ● (6) Keyboard backlight ZIF connector cable 2. Disconnect the following cables from the system board: ● (1) Keyboard ZIF connector cable ● (2) Fingerprint reader board ZIF connector cable ● (3) RTC battery cable ● (4) Card reader board ZIF connector cable ● (5) Front speakers cable 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts