HP ENVY 14-j100 Maintenance and Service Guide - Page 66
Heat sink, Battery see
View all HP ENVY 14-j100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
7. Remove the system board (2) by sliding it up and to the left at an angle. Reverse this procedure to install the system board. Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description For use only on computer models equipped with an Intel i7 processor and a graphics subsystem with discrete memory For use only on computer models equipped with an Intel i5 processor and a graphics subsystem with discrete memory For use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 830213-001 818112-001 818111-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28), and then remove the following components: a. Battery (see Battery on page 38) b. Fan (see Fan on page 47) c. RJ45 cover (see RJ45 cover on page 49) 56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts