HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 118
MPxIO overview, Preparing the host system, Enabling MPxIO for HP P63x0/P65x0 EVA
![]() |
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
MPxIO overview The Oracle multipathing software (MPxIO) provides basic failover and load-balancing capability to HP P6000, and EVA4x00/6x00/8x00 storage systems. MPxIO allows the merging of multiple SCSI layer paths, such as an iSCSI device exposing the same LUN via several different iSCSI target names. Because MPxIO is independent of transport, it can multipath a target that is visible on both iSCSI and FC ports. This section describes only the iSCSI implementation of MPxIO with the iSCSI or iSCSI/FCoE modules. For more information about MPxIO, see the Solaris Fibre Channel and Storage Multipathing Administration Guide at: http://docs.sun.com/source/819-0139. Preparing the host system To verify that MPxIO is enabled: 1. Enter the following command to verify that the MPIO setting is no: cat kernel/drv/iscsi.conf 2. 2. Verify mpxio-disable="no" If setting is yes change to no, and reboot: Reboot -- -r Example: MPxIO on all iSCSI port settings in /kernel/dev/iscsi.conf. # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # #ident "@(#)iscsi.conf 1.2 06/06/12 SMI" name="iscsi" parent="/" instance=0; ddi-forceattach=1; # # I/O multipathing feature (MPxIO) can be enabled or disabled using # mpxio-disable property. Setting mpxio-disable="no" will activate # I/O multipathing; setting mpxio-disable="yes" disables the feature. # # Global mpxio-disable property: # # To globally enable MPxIO on all iscsi ports set: # mpxio-disable="no";# # To globally disable MPxIO on all iscsi ports set: # mpxio-disable="yes"; # mpxio-disable="no"; # Enabling MPxIO for HP P63x0/P65x0 EVA This section describes the steps necessary to configure a Solaris server to recognize an HP storage array in an iSCSI multipath environment with the iSCSI or iSCSI/FCoE modules. Edit the scsi_vhci.conf file HP EVA storage arrays are supported with MPxIO: • As symmetric devices only • With no load balancing • With no failback To configure MPxIO for HP storage devices, the appropriate information needs to be added in the /kernel/drv/scsi_vhci.conf file. To enable MPxIO for HP storage: 1. Use a text editor to change the configuration file. For example: # vi /kernel/drv/scsi_vhci.conf 118 iSCSI or iSCSI/FCoE configuration rules and guidelines
![](/manual_guide/products/hewlettpackard-eva-p6550-hp-p6300p6500-eva-user-guide-56972486-2013-4330a37/118.png)