HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 218
Admin, Beacon, Clear, The following example shows how to open and close an Admin session
![]() |
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Admin Opens and closes an administrator (admin) session. Any command that changes the iSCSI or iSCSI/FCoE module's configuration must be entered in an Admin session. An inactive Admin session times out after 15 minutes. Authority Syntax Keywords Admin session admin start (or begin) end (or stop) cancel start (or begin) end (or stop) cancel Opens the Admin session. Closes the Admin session. The logout, shutdown, and reset commands also end an Admin session. Terminates an Admin session opened by another user. Use this keyword with care because it terminates the Admin session without warning the other user and without saving pending changes. NOTE: Closing a Telnet window during an Admin session does not release the session. When using Telnet, you must either wait for the Admin session to time out, or use the admin cancel command. Example: The following example shows how to open and close an Admin session: MEZ50 #> admin start Password : config MEZ50 (admin) #> . . . MEZ50 (admin) #> admin end MEZ50 #> Beacon Enables or disables the flashing of the blue UID beacon LED. Authority Syntax Keywords None beacon on off on off Turns on the flashing of the controller blue UID beacon. Turns off the flashing of the controller blue UID beacon. Example: The following example turns the controller blue UID beacon on and then off. MEZ50 #> beacon on MEZ50 beacon off Clear Removes all entries (events) from the iSCSI or iSCSI/FCoE module's log file or resets the FC and iSCSI statistic counters. Authority Syntax Admin session clear logs stats 218 Command reference
![](/manual_guide/products/hewlettpackard-eva-p6550-hp-p6300p6500-eva-user-guide-56972486-2013-4330a37/218.png)