HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 230

Quit Reply from 10.6.0.194: bytes=56 time=0.1ms Reply from 10.6.0.194: bytes=56 time=0.1ms Reply from 10.6.0.194: bytes=56 time=0.1ms Reply from 10.6.0.194: bytes=56 time=0.1ms Reply from 10.6.0.194: bytes=56 time=0.1ms Ping Statistics for 10.6.0.194: Packets: Sent = 8, Received = 8, Lost = 0 Approximate round trip times in milli-seconds: Minimum = 0.1ms, Maximum = 1.3ms, Average = 0.2ms Exits the command line interface and returns you to the login prompt (same as the exit command). Authority Syntax None quit Example 1:The following example shows the quit command for the iSCSI or iSCSI/FCoE module: MEZ50 (admin) #> quit MEZ50 login: Reboot Restarts the module firmware. Authority Syntax Admin session reboot Example: MEZ50 (admin) #> reboot Are you sure you want to reboot the System (y/n): y System will now be rebooted... Reset Restores the module configuration parameters to the factory default values. The reset factory command deletes all LUN mappings, as well as all persistent data regarding targets, LUNs, initiators, virtual port group settings, log files, iSCSI and MGMT IP addresses, FC and Ethernet port statistics, and passwords. This command also restores the factory default IP addresses. The reset mappings command clears only the LUN mappings. Authority Syntax Keywords Admin session reset factory mappings factory mappings Example 1: MEZ50 (admin) #> reset factory Are you sure you want to restore to factory default settings (y/n): y Please reboot the System for the settings to take affect Example 2: MEZ50 (admin) #> reset mappings Are you sure you want to reset the mappings in the system (y/n): y Please reboot the System for the settings to take affect. 230 Command reference