HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 43
Using the management module, Select Restart on the iSCSI Controller Shutdown Options window
![]() |
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Select Restart on the iSCSI Controller Shutdown Options window (Figure 17 (page 46)). Figure 17 iSCSI Controller Shutdown Options The following is an example of the shutdown procedure using the CLI: MEZ75 login: guest Password:******** Welcome to MEZ75 * * * HP StorageWorks MEZ75 * * * MEZ75 #> admin start -p config MEZ75 (admin) #> shutdown Are you sure you want to shutdown the System (y/n): y Using the management module Connecting to the management module You can connect to the management module through a public or a private network. NOTE: If you are using HP P6000 Command View on the management server to manage the P63x0/P65x0 EVAs, HP recommends that when accessing HP P6000 Command View on either the management server (server-based management) or the management module (array-based management), you use the same network. This is recommended until a multi-homed solution is available, which would allow the management module access to be configured on a separate network (private or different). If you use a laptop to connect to the management module, configure the laptop to have an address in the same IP range as the management module (for example, 192.168.0.2 with a subnet mask of 255.255.255.0). The management module has an MDI-X port that supports straight-through or crossover Ethernet cables. Use a Cat5e or greater cable to connect the management module from its Ethernet jack (2, Figure 18 (page 44)) to the management server. Using the management module 43
![](/manual_guide/products/hewlettpackard-eva-p6550-hp-p6300p6500-eva-user-guide-56972486-2013-4330a37/43.png)