HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 176

Issue: Initiator cannot login to iSCSI or iSCSI/FCoE module target Solution 1: Ensure the correct iSCSI port IP address is used Solution 2: In HP P6000 Command View, for each iSCSI controller 01 and 02, click the IP ports tab, then expand the TCP properties under the Advanced Settings. There should be available connections; if not, choose another IP port to log in to or reduce the connections from other initiators by logging out from unused connections (see Figure 89 (page 176)). Figure 89 IP Ports tab Issue: Initiator logs in to iSCSI or iSCSI/FCoE controller target but EVA assigned LUNs are not appearing on the initiator Solution 1. The initiator needs to log in to the target where the EVA LUN was assigned. Solution 2. The EVA LUN was assigned to a different iSCSI Host then was expected. Issue: EVA presented virtual disk is not seen by the initiator Solution 1. The initiator has to login to the proper iSCSI target. Match the virtual disk presentation properties as in Figure 90 (page 177) and Figure 91 (page 177) to the initiator's target login. 176 Troubleshooting