HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 187

Table 27 Error Messages (continued) Status code value Meaning How to correct 80 Invalid Volume Usage The disk volume is already a part of a disk group. Resolve the condition by setting the usage to a reserved state, wait for the usage to change to this state, and retry the request. 81 The disk volume usage cannot be modified, Resolve the condition by adding Minimum Volumes In Disk Group as the minimum number of disks exist in the additional disks and retry the request. disk group. 82 Shutdown In Progress The controller is currently shutting down. No action required. 83 Controller API Not Ready, Try Again Later The device is not ready to process the request. Retry the request at a later time. 84 Is Snapshot This is a snapshot virtual disk and cannot be No action required. a member of a Continuous Access group. 85 An incompatible mirror policy of the virtual Cannot add or remove DR group disk is preventing it from becoming a member. Mirror cache must be member of a Continuous Access group. active for this Vdisk. Check controller cache condition. Modify the mirror policy and retry the request. 86 HP P6000 Command View has detected this array as inoperative. Contact HP Service for assistance. Case 1: A virtual disk is in an inoperative state and the request cannot be processed. This is due to a loss of cache data from power/controller loss or disk drive failure. Report the error to product support. Case 2: The snapclone cannot be associated with a virtual disk that is in an inoperative state. HP P6000 Command View has detected this array as inoperative. Contact HP Services for assistance. Case 3: The snapshot cannot be associated with a virtual disk that is in an inoperative state. This is due to a loss of cache data from power/controller loss or disk drive failure. 87 Disk group inoperative The disk group is in an inoperative state and Report the error to product support. cannot process the request. 88 Storage system inoperative The storage system is inoperative and cannot Report the error to product support. process the request because all disk groups have lost sufficient drives such that no data is available. 89 Failsafe Locked The request cannot be performed because Resolve the condition and retry the the Continuous Access group is in a failsafe request. locked state. 90 Data Flush Incomplete The disk cache data need to be flushed before the condition can be resolved. Retry the request later. 91 This error is no longer supported. Redundancy Mirrored Inoperative Report the error to product support. 92 Duplicate LUN The LUN number is already in use by another client of the storage system. Select another LUN number and retry the request. 93 Other remote controller failed While the request was being performed, the Retry the request once remote remote storage system controller terminated. controller failout is complete. 94 Unknown remote Vdisk The remote storage system specified does Correctly select the remote storage not exist. system and retry the request. 187