HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 139
CLI Option: Enter the, appropriate IP Port.
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
1. Enable CHAP for the iSCSI or iSCSI/FCoE controller discovered iSCSI Initiator entry. CHAP can be enabled via CLI only. To enable CHAP for the iSCSI or iSCSI/FCoE controller discovered iSCSI Initiator entry using the iSCSI or iSCSI/FCoE controller CLI: a. If the iSCSI Initiator is not listed under the set chap command: • HP Command View Option: add the initiator iqn name string via the HP Command View Add Host tab. Go to HP Command View and select Hosts then select the Add Host tab and enter the iqn name string. • CLI Option: Enter the initiator add command and add the iSCSI Initiator that is about to do discovery. b. If the iSCSI Initiator is listed under the set chap command, then enable CHAP secret. For example: CHAPsecret01. • Select the index of the iSCSI Initiator. • To Enable CHAP, select 0, then enter the CHAP secret. 2. Enable CHAP for the iSCSI or iSCSI/FCoE controller iSCSI port: a. To enable CHAP for the iSCSI or iSCSI/FCoE controller iSCSI port using HP P6000 Command View: • Select the appropriate iSCSI Controller, then select the IP Ports tab, then select the appropriate IP Port. • Under Security, select Enabled in CHAP Status, then enter the CHAP Secret. For example, hpstorageworks • Click the Save Changes tab to save the changes. b. To enable CHAP for the iSCSI or iSCSI/FCoE controller iSCSI port using the iSCSI or iSCSI/FCoE controller CLI: • Enter the set chap command. • Select the appropriate Portal iqn name index that the initiator will log in to. • Select 0 to enable CHAP. • Enter a CHAP secret. For example: hpstorageworks. Set up the iSCSI Initiator 139