HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 231

Save Saves logs and traces. Authority Syntax Keywords Admin session save capture logs traces capture logs traces The save capture command creates a debug file that captures all debug dump data. After the command completes, you must FTP the debug capture file from the module. The save logs command creates a tar file that contains the module's log data, storing the file in the module's /var/ftp directory. After the command completes, you must FTP the log's tar file from the module. The save traces command creates a tar file that contains the module's dump data, storing the tar file in the module's /var/ftp directory. After the command completes, you must FTP the trace's tar file from the module. After executing this command, the system notifies you if the module does not have any dump data. Each time it generates dump data, the system adds an event log entry. Example 1: MEZ50 (admin) #> save capture Debug capture completed. Package is System_Capture.tar.gz Please use FTP to extract the file out from the System. Example 2: MEZ50 (admin) #> save logs Save Event Logs completed. Package is System_Evl.tar.gz Please use FTP to extract the file out from the System. Example 3: Save traces is not supported by the iSCSI or iSCSI/FCoE modules. MEZ50 (admin) #> save traces Save ASIC Traces failed. Set Configures general iSCSI or iSCSI/FCoE parameters, as well as parameters that are specific to the FC, iSCSI, and management ports. Command Set iSCSI module iSCSI/FCoE module alias alias chap chap fc [] chassis features fc [] iscsi [] features isns iscsi [] mgmt isns ntp mgmt properties ntp snmp [trap_destinations []] properties system snmp [trap_destinations []] system vpgroups [vpgroup index] Commands 231