HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 235

Set iSCSI, Con s an iSCSI port.

Get HP EVA P6550 PDF manuals and user guides View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 235 highlights

Enter feature key to be saved/activated: Set iSCSI Configures an iSCSI port. Authority Syntax Keywords Admin session set iscsi [] [] The iSCSI port to be configured. If not entered, all ports are selected as shown in the example. Example: MEZ50 (admin) #> set iscsi A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. WARNING: The following command might cause a loss of connections to both ports. Configuring iSCSI Port: 1 Port Status (0=Enable, 1=Disable) [Enabled ] Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ] MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ] Window Size (Min=8192B, Max=1048576B) [32768 ] IPv4 Address [33.33.52.96 ] IPv4 Subnet Mask [255.255.0.0 ] IPv4 Gateway Address [0.0.0.0 ] IPv4 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv4 VLAN (0=Enable, 1=Disable) [Disabled ] IPv6 Address 1 [:: ] IPv6 Address 2 [:: ] IPv6 Default Router [:: ] IPv6 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv6 VLAN (0=Enable, 1=Disable) [Disabled ] iSCSI Header Digests (0=Enable, 1=Disable) [Disabled ] iSCSI Data Digests (0=Enable, 1=Disable) [Disabled ] All attribute values for Port 1 that have been changed will now be saved. Configuring iSCSI Port: 2 Port Status (0=Enable, 1=Disable) [Enabled ] Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ] MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ] Window Size (Min=8192B, Max=1048576B) [32768 ] IPv4 Address [33.33.52.97 ] IPv4 Subnet Mask [255.255.0.0 ] IPv4 Gateway Address [0.0.0.0 ] IPv4 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv4 VLAN (0=Enable, 1=Disable) [Disabled ] IPv6 Address 1 [:: ] IPv6 Address 2 [:: ] IPv6 Default Router [:: ] IPv6 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv6 VLAN (0=Enable, 1=Disable) [Disabled ] iSCSI Header Digests (0=Enable, 1=Disable) [Disabled ] iSCSI Data Digests (0=Enable, 1=Disable) [Disabled ] All attribute values for Port 2 that have been changed will now be saved. Configuring iSCSI Port: 3 Commands 235

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
Enter feature key to be saved/activated:
Set iSCSI
Configures an iSCSI port.
Admin session
Authority
[<
PORT_NUM
>]
set iscsi
Syntax
The iSCSI port to be configured. If not entered, all ports are
selected as shown in the example.
[<
PORT_NUM
>]
Keywords
Example:
MEZ50 (admin) #>
set iscsi
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring iSCSI Port: 1
---------------------------
Port Status (0=Enable, 1=Disable)
[Enabled
]
Port Speed (0=Auto, 1=100Mb, 2=1Gb)
[Auto
]
MTU Size (0=Normal, 1=Jumbo, 2=Other)
[Normal
]
Window Size (Min=8192B, Max=1048576B)
[32768
]
IPv4 Address
[33.33.52.96
]
IPv4 Subnet Mask
[255.255.0.0
]
IPv4 Gateway Address
[0.0.0.0
]
IPv4 TCP Port No. (Min=1024, Max=65535)
[3260
]
IPv4 VLAN (0=Enable, 1=Disable)
[Disabled
]
IPv6 Address 1
[::
]
IPv6 Address 2
[::
]
IPv6 Default Router
[::
]
IPv6 TCP Port No. (Min=1024, Max=65535)
[3260
]
IPv6 VLAN (0=Enable, 1=Disable)
[Disabled
]
iSCSI Header Digests (0=Enable, 1=Disable)
[Disabled
]
iSCSI Data Digests (0=Enable, 1=Disable)
[Disabled
]
All attribute values for Port 1 that have been changed will now be saved.
Configuring iSCSI Port: 2
---------------------------
Port Status (0=Enable, 1=Disable)
[Enabled
]
Port Speed (0=Auto, 1=100Mb, 2=1Gb)
[Auto
]
MTU Size (0=Normal, 1=Jumbo, 2=Other)
[Normal
]
Window Size (Min=8192B, Max=1048576B)
[32768
]
IPv4 Address
[33.33.52.97
]
IPv4 Subnet Mask
[255.255.0.0
]
IPv4 Gateway Address
[0.0.0.0
]
IPv4 TCP Port No. (Min=1024, Max=65535)
[3260
]
IPv4 VLAN (0=Enable, 1=Disable)
[Disabled
]
IPv6 Address 1
[::
]
IPv6 Address 2
[::
]
IPv6 Default Router
[::
]
IPv6 TCP Port No. (Min=1024, Max=65535)
[3260
]
IPv6 VLAN (0=Enable, 1=Disable)
[Disabled
]
iSCSI Header Digests (0=Enable, 1=Disable)
[Disabled
]
iSCSI Data Digests (0=Enable, 1=Disable)
[Disabled
]
All attribute values for Port 2 that have been changed will now be saved.
Configuring iSCSI Port: 3
---------------------------
Commands
235