HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 24

Figure 5 P6000 EVA iSCSI/FCoE controller enclosure (rear view) 1. Power supply 1 2. Controller 1 3. Management module status LEDs 4. Ethernet port 5. Management module 6. Controller 2 7. Rear UID push button 8. Enclosure status LEDs 9. Enclosure power push button 10. Power supply 2 11. 10GbE ports 1-2 12. DP-A and DP-B, connection to back-end (storage) 13. Serial port 14. FP3 and FP4, connection to front end (host or SAN) 15. SW Management port 16. Manufacturing diagnostic port 17. Controller status and fault LEDs 18. iSCSI/FCoE recessed maintenance button NOTE: The only difference between the P63x0 and P65x0 controllers is the number indicated below the SAS data ports (DP-A and DP-B). On the P63x0, 1 is displayed (Figure 6 (page 24)). On the P65x0, 1 | 2is displayed (Figure 7 (page 24)). Figure 6 P63x0 data port numbering Figure 7 P65x0 data port numbering Controller status indicators The status indicators display the operational status of the controller. The function of each indicator is described in Table 3 (page 25). During initial setup, the status indicators might not be fully operational. Each port on the rear of the controller has an associated status indicator located directly above it. Table 1 (page 25) lists the port and its status description for the HSV340. Table 2 (page 25) lists the port and its status descriptions for the HSV340 FC-iSCSI. 24 P63x0/P65x0 EVA hardware