HP EVA P6550 HP P6300/P6500 EVA User Guide (5697-2486, September 2013) - Page 185

Table 27 Error Messages (continued) Status code value 59 Maximum Number of Objects Exceeded. Meaning How to correct Case 1: The maximum number of items Case 1: If this operation is still desired, allowed has been reached. delete one or more of the items and Case 2: The maximum number of EVA hosts retry the operation. has been reached. Case 2: If this operation is still desired, delete one or more of the EVA hosts Case 3: The maximum number of port and retry the operation. WWNs has been reached. Case 3: If this operation is still desired, delete one or more of the port WWNs and retry the operation. 60 Max size exceeded Case 1: The maximum number of items Case 1: If this operation is still desired, already exist on the destination storage cell. delete one or more of the items on the Case 2: The size specified exceeds the maximum size allowed. destination storage cell and retry the operation. Case 3: The presented user space exceeds Case 2: Use a smaller size and retry the maximum size allowed. the operation. Case 4: The presented user space exceeds Case 3: No action required. the maximum size allowed. Case 4: No action required. Case 5: The size specified exceeds the maximum size allowed. Case 5: Use a smaller size and try this operation again. Case 6: The maximum number of EVA hosts Case 6: If this operation is still desired, already exist on the destination storage cell. delete one or more of the EVA hosts Case 7: The maximum number of EVA hosts and retry the operation. already exist on the destination storage cell. Case 7: If this operation is still desired, Case 8: The maximum number of Continuous delete one or more of the virtual disks Access groups already exist. on the destination storage cell and retry the operation. Case 8: If this operation is still desired, delete one or more of the groups and retry the operation. 61 Password mismatch. Please update your system's password in the Storage System Access menu. Continued attempts to access this storage system with an incorrect password will disable management of this storage system. 62 DR group is merging 63 DR group is logging 64 Connection is suspended 65 Bad image header 66 Bad image 67 Obsolete The login password entered on the controllers does not match. Reconfigure one of the storage system controller passwords, then use the management software to set the password to match the device so communication can proceed. The operation cannot be performed because Wait for the merge operation to the Continuous Access connection is complete and retry the request. currently merging. The operation cannot be performed because Wait for the logging operation to the Continuous Access connection is complete and retry the request. currently logging. The operation cannot be performed because Resolve the suspended mode and retry the Continuous Access connection is the request. currently suspended The firmware image file has a header checksum error. Retrieve a valid firmware image file and retry the request. The firmware image file has a checksum error. Retrieve a valid firmware image file and retry the request. This error is no longer supported. Report the error to product support. 185