HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 124
Connecting the Secondary Hard Drive Power Cable and Data Cable,
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
5. Connect the appropriate drive cables: a. If installing a second hard drive, connect the power cable (1) and data cable (2) to the rear of the drive and connect the other end of the data cable to the light blue connector on the system board labeled SATA1. Figure 4-31 Connecting the Secondary Hard Drive Power Cable and Data Cable b. If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled MEDIA. Figure 4-32 Connecting the Media Card Reader USB Cable NOTE: Refer to System Board Connections on page 96 for an illustration of the system board drive connectors. 6. Replace the 5.25-inch drive. 7. Replace the front bezel (if removed) and access panel. 8. If the computer was on a stand, replace the stand. 9. Reconnect the power cord and turn on the computer. 10. Lock any security devices that were disengaged when the access panel was removed. 116 Chapter 4 Small Form Factor (SFF) Hardware Upgrades