HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 41
Removing a Drive from a Drive Bay
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Removing a Drive from a Drive Bay CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the access panel and front bezel. 6. Disconnect the drive cables, as indicated in the following illustrations: CAUTION: When removing the cables, pull the tab or connector instead of the cable itself to avoid damaging the cable. ● If you are removing an optical drive, disconnect the power cable (1) and data cable (2) from the back of the drive. Figure 2-14 Disconnecting the Optical Drive Cables Removing a Drive from a Drive Bay 33