HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 37
Removing a Standard PCI Expansion Card, Removing an Expansion Slot Cover
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
8. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Lift the expansion slot cover from the expansion slot. Figure 2-9 Removing an Expansion Slot Cover b. If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Lift the card straight up to remove it. Be sure not to scrape the card against other components. Figure 2-10 Removing a Standard PCI Expansion Card Removing or Installing an Expansion Card 29