HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 128
Connecting the Hard Drive Cables, Installing the Hard Drive
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
12. Align the guide screws with the slots on the chassis drive cage, press the hard drive down into the bay, then slide it back until it stops and locks in place. Figure 4-38 Installing the Hard Drive 13. Connect the power cable (1) and data cable (2) to the back of the hard drive. NOTE: If the system has only one SATA hard drive, the data cable must be connected to the dark blue connector labeled SATA0 on the system board to avoid any hard drive performance problems. Figure 4-39 Connecting the Hard Drive Cables 14. Rotate the drive cage for internal drives and the power supply down to their normal positions. 15. Replace the access panel. 16. If the computer was on a stand, replace the stand. 17. Reconnect the power cord and turn on the computer. 18. Lock any security devices that were disengaged when the access panel was removed. 120 Chapter 4 Small Form Factor (SFF) Hardware Upgrades