HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 141
Removing a Bezel Blank, Replacing the Front Bezel
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Removing a Bezel Blank On some models, there is a bezel blank covering the internal drive bay that needs to be removed before installing a drive. To remove a bezel blank: 1. Remove the access panel and front bezel. 2. To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2). Figure 5-5 Removing a Bezel Blank Replacing the Front Bezel Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1) then rotate the top side of the bezel onto the chassis (2) and snap it into place. Figure 5-6 Replacing the Front Bezel Removing a Bezel Blank 133
Removing a Bezel Blank
On some models, there is a bezel blank covering the internal drive bay that needs to be removed
before installing a drive. To remove a bezel blank:
1.
Remove the access panel and front bezel.
2.
To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 5-5
Removing a Bezel Blank
Replacing the Front Bezel
Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1)
then rotate the top side of the bezel onto the chassis (2) and snap it into place.
Figure 5-6
Replacing the Front Bezel
Removing a Bezel Blank
133