HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 43
CAUTION, Removing a 5.25-inch Drive in the Minitower Configuration Optical Drive
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
7. Remove the drive from the drive bay as follows: ● To remove a 5.25-inch drive in the desktop configuration, press down on the yellow drivelock mechanism (1) and slide the drive from the drive bay (2). CAUTION: When the yellow drivelock is pressed, all the 5.25-inch drives are released so do not tilt the unit and allow the drives to fall out. Figure 2-17 Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive shown) ● To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock mechanism (1) for that specific drive and slide the drive from the drive bay (2). Figure 2-18 Removing a 5.25-inch Drive in the Minitower Configuration (Optical Drive shown) Removing a Drive from a Drive Bay 35
7.
Remove the drive from the drive bay as follows:
●
To remove a 5.25-inch drive in the desktop configuration, press down on the yellow
drivelock mechanism (1) and slide the drive from the drive bay (2).
CAUTION:
When the yellow drivelock is pressed, all the 5.25-inch drives are released so
do not tilt the unit and allow the drives to fall out.
Figure 2-17
Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive
shown)
●
To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock
mechanism (1) for that specific drive and slide the drive from the drive bay (2).
Figure 2-18
Removing a 5.25-inch Drive in the Minitower Configuration (Optical Drive
shown)
Removing a Drive from a Drive Bay
35