HP Elite 8300 HP Compaq Business PC Hardware Reference Guide - Elite 8300 Seri - Page 26
Removing the Computer Access Panel - cmt
View all HP Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing the Computer Access Panel To access internal components, you must remove the access panel: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Lift up on the access panel handle (1) then lift the access panel off the computer (2). Figure 2-1 Removing the Computer Access Panel 18 Chapter 2 Convertible Minitower (CMT) Hardware Upgrades