HP LD4245tm Network Sign Manager User Guide - Page 27
Power indicator LED, DPM Select, Remote/Key Lock, Ambient Light Sensor, 2D Dimming, Remote, Key Lock
![]() |
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Image Sticking Method Inversion Dot Wash Description Inverts the current screen color to remove the ghost image. Imposes black dots on the image, moving them every 5 seconds (only available on select models). Power indicator LED Power Indicator LED is used to enable or disable the power indicator of the display. DPM Select DPM Select is used to change the display DPM (Dynamic Power Management) setting. Setting DPM Select to On will automatically switch the display into the energy-saving mode when no image signal is entered to the display. Remote/Key Lock Remote/Key Lock is used to lock or unlock the remote control and the keys on the display. Setting Remote/ Key Lock to Lock On will disable the remote control and keys on the display, preventing you from controlling the display locally with either the IR remote control or using the display control buttons. Ambient Light Sensor Ambient Light Sensor will turn the ambient light sensor on HIGH, LOW, or OFF. HIGH will frequently adjust the backlight brightness based on input from the sensor. LOW will periodically adjust the backlight brightness based on input from the sensor. OFF will not adjust the backlight brightness. NOTE: Ambient light sensor is only available for select models. 2D Dimming 2D Dimming, when turned ON, will allow the display to dynamically adjust sections of the backlight to enhance details and make blacks more black. 2D Dimming may result in lowering the overall energy utilization of the display. NOTE: 2D dimming is only available for select models. Display configuration 21
![](/manual_guide/products/hewlettpackard-ld4210-network-sign-manager-user-guide-8f6620f/27.png)