HP LD4245tm Network Sign Manager User Guide - Page 37
Ethernet Network, RS-232-C Serial Communication, Connect
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Ethernet Network To use Network (Ethernet) communication: 1. Under Communication Select, select Network. 2. Click OK to complete. RS-232-C Serial Communication To use RS-232-C serial communication: 1. Under Communication Select, select Serial. Adjust the serial communication settings to fit your environment. Item Port Baudrate Data Parity Stop Flow Control Description Communication port (COM1 - COM9), Default: COM1 Communication speed (2400 - 115200), Default: 9600 Communication data (Data5 - Data8), Default: Data8 Parity check (even, odd, none), Default: none The number of stop bits (0 - 1), Default: 1 bit Data flow (Xon/Xoff, hardware, none), Default: none 2. Click OK to complete. Connect Connect is used to reconnect HP Network Sign Manager to the network manually when the display is disconnected. The following describes how to reconnect a specified display to the network. 1. Select a display or display group to reconnect. 2. Click Connect. NOTE: This function does not support a display connected with serial communication. Toolbar 31