HP LH4r HP Netserver LC 3 User Guide - Page 15
Install Accessory Boards
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 1 Retaining Latch System Board in Raised Position Retaining Latch Installation Overview Slot Cover Slot 1 Slot 5 Slot 6 Backplane Figure 1-4. System Board in Raised Position Install Accessory Boards Install all accessory boards at this point. The backplane in the HP NetServer has five PCI-only slots (numbered 2 through 6) and one combined PCI/ISA slot (number 1). Boards can be identified by the shape of their connectors, as shown in Figure 1-5. 9
Chapter 1
Installation Overview
9
Slot
Cover
Slot 1
Slot 5
Slot 6
Backplane
Retaining Latch
Retaining Latch
System Board in
Raised Position
Figure 1-4. System Board in Raised Position
Install Accessory Boards
Install all accessory boards at this point. The backplane in the HP NetServer has
five PCI-only slots (numbered 2 through 6) and one combined PCI/ISA slot
(number 1).
Boards can be identified by the shape of their connectors, as shown in
Figure 1-5.