HP LH4r HP Netserver LC 3 User Guide - Page 54
Error Message Is Displayed
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 6 Troubleshooting 4. Restart the system. If the system does not function, refer to one of the following sections, depending upon whether an error message is displayed: ◊ "Error Message Is Displayed" ◊ "No Error Message Displayed" 5. If the system still will not restart, clear the system configuration memory and restart the system, as described in "Clearing the System Configuration." Error Message Is Displayed There are two kinds of error messages that may prevent the HP NetServer from booting. These are: • Highlighted error messages (white text on gray background). Press ENTER to see a definition of the message and what action to take to remedy the problem. • Error messages displayed in normal video. If an HP NetServer configuration error is reported during the startup routine, clear the system configuration memory and reconfigure as described under "Clearing the System Configuration," and restart the HP NetServer. Power-On System Hardware Test Error Messages If an error occurs during the power-on system hardware test (POST) when the HP NetServer starts, press ENTER to view system error to display details of the error. Follow the instructions on the screen. Correct the error before proceeding, even if the HP NetServer appears to start successfully. If the HP NetServer starts, but the power-on system hardware test still reports an error message, clear the system configuration memory, as described in "Clearing the System Configuration." The following table describes common errors and the corrective action you may take to remedy the problem: 48