HP M4345 User Guide - Page 197
Non HP supply installed Economode, PAPER WRAPPED AROUND FUSER - mfp installing toner
UPC - 882780548619
View all HP M4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Table 11-1 Control-panel messages (continued) Control panel message Description Recommended action onscreen dialog box. See Clear jams from the document feeder. Also see Solve repeated jams. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. See the HP support flyer, or go to http://www.hp.com/support/ ljm4345mfp. Jam in document feeder Media is jammed in the document feeder. Follow the instructions in the onscreen dialog box. See Clear jams from the document feeder. Also see Solve repeated jams. LDAP Server is not responding Contact The LDAP server has exceeded the time administrator out value for an address request. Verify the LDAP server address. See Solve e-mail problems. Contact the network administrator. Load envelope feeder The envelope feeder is empty. Load the envelope feeder. Load Tray 1 The tray is empty or configured for a different size than the size requested. Follow the instructions in the onscreen dialog box. Manually feed The specified job requires manual feed from tray 1. Load the requested media into tray 1. To override the message, touch OK to use a type and size of media that is available in another tray. Network connection required for Digital Sending. Contact administrator. A digital-sending feature has been configured, but a network connection is not detected. Verify the network connection. See Solve network printing problems. Contact the network administrator. Non HP supply installed Economode disabled A non-HP supply or a refilled HP supply has been installed. Follow the instructions in the onscreen dialog box. Novel login required Novell authentication has been enabled for Enter Novell network credentials to access this destination. the requested feature. Order cartridge The number of pages remaining for the print cartridge has reached the low threshold. The MFP was set to stop printing when a supply needs to be ordered. Touch OK to continue printing until the print cartridge is out of toner. To order a new print cartridge, see Order parts, accessories, and supplies. Output bin full The specified output bin is full and printing cannot continue. Empty the bin to continue printing. Output paper path open The paper path between the MFP and the output device is open and must be closed before printing can continue. 1. If you have a 3-bin mailbox installed, make sure the jam-access door is closed. 2. If you have a stapler/stacker installed, make sure the staple cartridge is snapped into position and that the staple-cartridge door is closed. PAPER WRAPPED AROUND FUSER A jam has occurred because paper has wrapped around the fuser. Follow the instructions in the onscreen dialog box. See Clear jams. Password or name is incorrect. Please enter correct login. The user name or password was typed incorrectly. Retype the user name and password. ENWW Control-panel messages 185