HP M4345 User Guide - Page 36

Default Copy Options Table 2-3 Default Copy Options menu Menu item Number of Copies Number of Sides Staple/Collate Image Adjustment Output Bin Edge-To-Edge Sub-menu item Staple Collate Background Cleanup Sharpness Output Bin Paper Path Values Description Type the number of copies. The factory default setting is 1. 1 Set the default number of copies for a copy job. Set the default number of sides for copies. 2 None (default) One left angled Off On (default) Adjust the value within the range. Adjust the value within the range. Set up options for stapling and collating sets of copies. If collation is selected, the device prints a complete copy before starting on the next copy. If collation is not selected, the device prints page 1 for all copies, then page 2 for all copies, etc. Increase the Background Cleanup setting to remove faint images from the background or to remove a light background color. Adjust the Sharpness setting to clarify or soften the image. Select the default output bin, if applicable, for copies. Face-up (straightest path) Select the default paper path for copies. Face-down (correct order) Normal (recommended) (default) Edge-To-Edge Output If the original document is printed close to the edges, use the Edge-To-Edge feature to avoid shadows that can appear along the edges. Combine this feature with the Reduce/Enlarge feature to ensure that the entire page is printed on the copies. 24 Chapter 2 Control Panel ENWW