HP M4345 User Guide - Page 211
Clear jams from the fuser, WARNING
UPC - 882780548619
View all HP M4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
3. If the jammed media is inside the device, carefully pull the jammed media out of the device. 4. If the jammed media is inside the 3-bin mailbox or the stapler/stacker, carefully pull the jammed media up and out of the device. 5. If you are using a 3-bin mailbox, the jammed media might be completely inside the device. Open the jam-access cover that is on the top of the 3-bin mailbox, and carefully pull the jammed media out of the mailbox. 6. Reinstall the output-bin assembly, the 3-bin mailbox, or the stapler/stacker. Insert the device at an angle, and then slide it into the device. 7. If a jam message persists, jammed media is still in the device. Look for the jam in another location. Clear jams from the fuser Use this procedure to clear jams that occur in the fuser. 1. Turn the device off and wait 30 minutes for the fuser to cool. WARNING! The fuser is very hot. To avoid minor burns, wait 30 minutes for the fuser to cool before removing it from the device. ENWW Clear jams 199