HP Nc4010 Software Guide - Page 37
Setting DriveLock Passwords, while the F10 = ROM Based Setup
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Security Setting DriveLock Passwords Ä CAUTION: If you forget the DriveLock user and the DriveLock master passwords, the hard drive is permanently unusable. Ä CAUTION: To prevent loss of work and damage to the notebook and the hard drive, shut down the notebook before inserting or removing a primary hard drive. (The primary hard drive is any hard drive used in the hard drive bay.) To access the DriveLock settings in Computer Setup, you must shut down, then turn on the notebook. If you open Computer Setup from a Windows restart, DriveLock settings are not accessible. 1. Save your work, exit all applications, and shut down the notebook. If you are not sure whether the notebook is off or in Hibernation, briefly press the power button. If your work returns to the screen, save your work, exit all applications, and then shut down the notebook. 2. Insert the hard drive into the notebook (not an optional Port Replicator or External MultiBay). 3. Open Computer Setup by turning on (not restarting) the notebook. Press F10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. 4. Use the arrow keys to select the Security menu > DriveLock passwords, then press enter. 5. Select the location of the hard drive, then press F10. 6. Toggle the Protection field to Enable. 7. Read the warning. To continue, press F10. 8. Type your user password in the New Password and Verify New Password fields, then press F10. Software Guide 3-11