HP Nc4010 Software Guide - Page 64
Enabling Devices in Computer Setup - usb boot
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
MultiBoot ✎ Since no drive letter is associated with the NIC, changing the boot order of a NIC does not affect drive letters of the other devices. Enabling Devices in Computer Setup The notebook can start up from a USB device or the NIC only if that device has been enabled for inclusion in MultiBoot. To enable a device or location for inclusion in MultiBoot: 1. Turn on or restart the notebook. Press F10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. 2. Use the arrow keys to select the Advanced menu > Device Options. ❏ To enable bootable media in USB drives or in drives inserted into a Port Replicator, select Enable USB legacy support. ❏ To enable a NIC, select Internal Network adapter boot. 3. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save Changes and Exit, then follow the instructions on the screen. Your preferences are set as you exit Computer Setup and are in effect when the notebook restarts. ✎ To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL) server during startup without using MultiBoot, quickly press F12 when the Network Service Boot message appears briefly in the lower right corner of the screen. Software Guide 5-3