Home » HP Manuals » Multifunction Devices » HP PSC 1400 » Manual Viewer

HP PSC 1400 User Guide - Page 50

Hewlett-Packard LIMITED WARRANTY STATEMENT

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Chapter 10 4. Place the print cartridges in a print cartridge protector or an airtight plastic container so they will not dry out, and put them aside. Do not send them with the HP All-in-One unless the HP customer support call agent instructs you to. 5. Close the print-carriage access door and wait a few minutes for the print carriage to move back to its home position (on the left side). Note Make sure the print carriage has returned to its parked position before turning off the HP All-in-One. 6. Press the On button to turn off the HP All-in-One. 7. Unplug the power cord, and then disconnect it from the HP All-in-One. Note Do not return the power cord and power supply with the HP All-in-One. The replacement HP All-in-One will not be shipped with these items. Store the power cord and power supply in a safe place until the replacement HP All-in-One arrives. 8. If available, pack the HP All-in-One for shipment by using the original packing materials or the packaging materials that came with your exchange device. Get HP support If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. 9. Place the return shipping label on the outside of the box. 10. Include the following items in the box: - A complete description of symptoms for service personnel (samples of print quality problems are helpful). - A copy of the sales slip or other proof of purchase to establish the warranty coverage period. - Your name, address, and a phone number where you can be reached during the day. Hewlett-Packard LIMITED WARRANTY STATEMENT Your HP All-in-One comes with a limited warranty that is described in this section. 46 HP PSC 1400 All-in-One series

Section	Page
Contents	5
HP All-in-One overview	7
The HP All-in-One at a glance	7
Control panel overview	8
Status light overview	8
Use the HP Image Zone to do more with your HP All-in-One	10
Access the HP Image Zone software (Windows)	10
Access the HP Image Zone software (Mac)	10
Find more information	10
Connection information	11
Connect using a USB cable	11
Use printer sharing (Windows)	11
Use printer sharing (Mac OS X)	11
Load originals and load paper	13
Load an original	13
Choose papers for printing and copying	13
Recommended papers	13
Papers to avoid	13
Load paper	14
Load full-size paper	14
Load 10 x 15 cm (4 x 6 inch) photo paper	15
Load envelopes, postcards, and Hagaki	16
Load other types of paper	16
Avoid paper jams	17
Use the copy features	19
Set the copy paper type	19
Increase copy speed or quality	20
Make multiple copies	20
Make a borderless copy of a photo	21
Resize an original to fit onto letter or A4 paper	21
Stop copying	22
Print from your computer	23
Print from a software application	23
Make the HP All-in-One the default printer	24
Stop a print job	24
Use the scan features	25
Scan from the control panel	25
Adjust the preview image	26
Stop scanning	26
Use HP Instant Share	27
Overview	27
Get started	27
Send images using your computer	27
Order supplies	31
Order paper, transparency film, or other media	31
Order print cartridges	31
Order other supplies	31
Maintain your HP All-in-One	33
Clean the HP All-in-One	33
Clean the glass	33
Clean the lid backing	33
Clean the exterior	33
Check the estimated ink levels	33
Print a self-test report	34
Work with print cartridges	34
Replace the print cartridges	34
Align the print cartridges	36
Clean the print cartridges	37
Clean the print cartridge contacts or around the ink nozzles	37
Troubleshooting information	39
Before you call HP Support	39
View the Readme file	39
Setup troubleshooting	39
Hardware setup troubleshooting	40
Software installation troubleshooting	42
Uninstall and reinstall the software	44
Operational troubleshooting	45
Paper troubleshooting	45
Print cartridge troubleshooting	45
Device update	46
Device update (Windows)	46
Device update (Mac)	46
Get HP support	47
Get support and other information from the Internet	47
Warranty support	47
Warranty upgrades	47
Return your HP All-in-One for service	47
HP customer support	47
Access your serial number and service ID	48
Contact HP	48
Call HP Korea customer support	49
Prepare your HP All-in-One for shipment	49
Hewlett-Packard LIMITED WARRANTY STATEMENT	50
Technical information	53
System requirements	53
Paper specifications	53
Paper-tray capacities	53
Paper sizes	53
Print margin specifications	54
Print specifications	54
Copy specifications	55
Scan specifications	55
Physical specifications	56
Power specifications	56
Environmental specifications	56
Additional specifications	56
Environmental product stewardship program	56
Protecting the environment	56
Ozone production	56
Energy consumption	56
Paper use	57
Plastics	57
Material safety data sheets	57
Recycling program	57
HP inkjet supplies recycling program	57
Important recycling information for our customers in the European Union	57
Regulatory notices	58
Regulatory model identification number	58
FCC statement	58
Note à l’attention des utilisateurs Canadien/notice to users in Canada	59
Notice to users in Australia	59
Notice to users in Korea	59

Match case Limit results 1 per page

Place the print cartridges in a print cartridge protector or an airtight plastic container so they

will not dry out, and put them aside. Do not send them with the HP All-in-One unless the

HP customer support call agent instructs you to.

Close the print-carriage access door and wait a few minutes for the print carriage to move

back to its home position (on the left side).

Note

Make sure the print carriage has returned to its parked position before

turning off the HP All-in-One.

Press the

button to turn off the HP All-in-One.

Unplug the power cord, and then disconnect it from the HP All-in-One.

Note

Do not return the power cord and power supply with the HP All-in-One. The

replacement HP All-in-One will not be shipped with these items. Store the power

cord and power supply in a safe place until the replacement HP All-in-One arrives.

If available, pack the HP All-in-One for shipment by using the original packing materials or

the packaging materials that came with your exchange device.

If you do not have the original packaging materials, please use other adequate packaging

materials. Shipping damage caused by improper packaging and/or improper transportation

is not covered under the warranty.

Place the return shipping label on the outside of the box.

10.

Include the following items in the box:

–

A complete description of symptoms for service personnel (samples of print quality

problems are helpful).

–

A copy of the sales slip or other proof of purchase to establish the warranty coverage

period.

–

Your name, address, and a phone number where you can be reached during the day.

Hewlett-Packard LIMITED WARRANTY STATEMENT

Your HP All-in-One comes with a limited warranty that is described in this section.

Chapter 10

HP PSC 1400 All-in-One series

Get HP support