HP Pavilion 17-g000 17-g099 AMD Models - Maintenance and Service Guide - Page 51
Heat sink assembly, computer on, and then shut it down through the operating system.
View all HP Pavilion 17-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4. Remove the fan from the computer (3). Reverse this procedure to install the fan. Heat sink assembly NOTE: The heat sink assembly spare part kit includes replacement thermal materials. Description For use in models with UMA graphics AMD Radeon R5 For use in models with discrete AMD Radeon R7 M360 (Meso-XT) graphics For use in models with UMA AMD Radeon R6 graphics For use in models with discrete graphics Spare part number 806759-001 806760-001 809104-001 809105-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Component replacement procedures 43