HP Pavilion 17-g000 17-g099 AMD Models - Maintenance and Service Guide - Page 61
Power button board, Remove the Phillips PM2.0×2.5 screw
View all HP Pavilion 17-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Power button board Description Power button board (includes cable) Spare part number 809310-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 27). 5. Remove the optical drive (see Optical drive on page 28). 6. Remove the bottom cover (see Bottom cover on page 32). 7. Remove the system board (see System board on page 48). To remove the power button board: 1. Disconnect the calbe (1). 2. Remove the Phillips PM2.0×2.5 screw (2) that secures the power button board to the computer. 3. Remove the power button board from the computer (3). Reverse this procedure to install the power button board and cable. Component replacement procedures 53