HP Pavilion 17-g000 17-g099 AMD Models - Maintenance and Service Guide - Page 62
Power connector, Pull the tab away from the connector
View all HP Pavilion 17-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Power connector Description Power connector cable Spare part number 809295-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 27). 5. Remove the optical drive (see Optical drive on page 28). 6. Remove the bottom cover (see Bottom cover on page 32). 7. Remove the system board (see System board on page 48). To remove the power connector cable: 1. Pull the tab away from the connector (1). 2. Remove the cable (2) from the left hinge that sits above the power connector. 3. Remove the power connector (3) from the computer. Reverse this procedure to install the power connector cable. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts